Intel(R) C600+/C220+ series chipset SATA RAID Controllerntroller

; Copyright (c) 2009-2018 Intel Corporation

; **********************************************************************************************

; **********************************************************************************************

; **    Filename:  iaStorE.inf

; **    Revision:  DRIVER_INFO

; **    Abstract:  Windows* INF File for AHCI Intel(R) Rapid Storage Technology Enterprise Driver

; **               Installs: RSTe AHCI RAID Controller Miniport + RST Filter Driver

; **********************************************************************************************

[Version]

Signature="$Windows NT$"

Provider=%INTEL%

ClassGUID={4D36E97B-E325-11CE-BFC1-08002BE10318}

Class=SCSIAdapter

CatalogFile=iastore.cat

DriverVer=01/25/2019,5.6.0.1006

;

[PackageInfo]

Name=AHCI

;

[SourceDisksNames]

1 = %DiskId1%,,,""

[DestinationDirs]

DefaultDestDir = 12

;

[ControlFlags]

ExcludeFromSelect = *

;

[Manufacturer]

%INTEL% = INTEL, NTamd64.6.1

;

[iaStorE_Service_Inst]

ServiceType    = %SERVICE_KERNEL_DRIVER%

StartType      = %SERVICE_BOOT_START%

ErrorControl   = %SERVICE_ERROR_NORMAL%

ServiceBinary  = %12%\iaStorE.sys

LoadOrderGroup = SCSI miniport

AddReg         = pnpsafe_pci_addreg

;

[iaStorE_EventLog_Inst]

AddReg = iaStorE_EventLog_AddReg

;

[iaStorE_EventLog_AddReg]

HKR,,EventMessageFile,%REG_EXPAND_SZ%,"%%SystemRoot%%\System32\IoLogMsg.dll;%%SystemRoot%%\System32\drivers\iaStorE.sys"

HKR,,TypesSupported,%REG_TYPE_DWORD%,7

;

[iaStorF_Service_Inst]

ServiceType    = %SERVICE_KERNEL_DRIVER%

StartType      = %SERVICE_BOOT_START%

ErrorControl   = %SERVICE_ERROR_NORMAL%

ServiceBinary  = %12%\iaStorF.sys

;

[iaStorF_EventLog_Inst]

AddReg = iaStorF_EventLog_AddReg

;

[iaStorF_EventLog_AddReg]

HKR,,EventMessageFile,%REG_EXPAND_SZ%,"%%SystemRoot%%\System32\IoLogMsg.dll"

HKR,,TypesSupported,%REG_TYPE_DWORD%,7

;

;********************************************************

;*

;* 64-BIT X86 ARCHITECTURE

;*

;* This section specifies the 64-bit architecture specific INF file entries

;* required to install a driver as a 64-bit compatible driver.

;*

;******************************************************************************

[SourceDisksFiles.amd64]

iaStorE.sys = 1,,,

iaStorF.sys = 1,,,

;

[INTEL.NTamd64.6.1]

;Windows_7_x64 and later

%PCI\VEN_8086&DEV_2826&SUBSYS_047D1014.DeviceDesc% = iaStorE_inst, PCI\VEN_8086&DEV_2826&SUBSYS_047D1014

%PCI\VEN_8086&DEV_2826&SUBSYS_04811014.DeviceDesc% = iaStorE_inst, PCI\VEN_8086&DEV_2826&SUBSYS_04811014

%PCI\VEN_8086&DEV_2826&SUBSYS_04851014.DeviceDesc% = iaStorE_inst, PCI\VEN_8086&DEV_2826&SUBSYS_04851014

%PCI\VEN_8086&DEV_2826&SUBSYS_11B61734.DeviceDesc% = iaStorE_inst, PCI\VEN_8086&DEV_2826&SUBSYS_11B61734

%PCI\VEN_8086&DEV_2826&SUBSYS_201019E5.DeviceDesc% = iaStorE_inst, PCI\VEN_8086&DEV_2826&SUBSYS_201019E5

%PCI\VEN_8086&DEV_2826&SUBSYS_201219E5.DeviceDesc% = iaStorE_inst, PCI\VEN_8086&DEV_2826&SUBSYS_201219E5

%PCI\VEN_8086&DEV_2826&SUBSYS_201319E5.DeviceDesc% = iaStorE_inst, PCI\VEN_8086&DEV_2826&SUBSYS_201319E5

%PCI\VEN_8086&DEV_2826&SUBSYS_201519E5.DeviceDesc% = iaStorE_inst, PCI\VEN_8086&DEV_2826&SUBSYS_201519E5

%PCI\VEN_8086&DEV_2826&SUBSYS_201619E5.DeviceDesc% = iaStorE_inst, PCI\VEN_8086&DEV_2826&SUBSYS_201619E5

%PCI\VEN_8086&DEV_2826&SUBSYS_201B19E5.DeviceDesc% = iaStorE_inst, PCI\VEN_8086&DEV_2826&SUBSYS_201B19E5

%PCI\VEN_8086&DEV_2826&SUBSYS_201D19E5.DeviceDesc% = iaStorE_inst, PCI\VEN_8086&DEV_2826&SUBSYS_201D19E5

%PCI\VEN_8086&DEV_2826&SUBSYS_201F19E5.DeviceDesc% = iaStorE_inst, PCI\VEN_8086&DEV_2826&SUBSYS_201F19E5

%PCI\VEN_8086&DEV_2826&SUBSYS_28228086.DeviceDesc% = iaStorE_inst, PCI\VEN_8086&DEV_2826&SUBSYS_28228086

%PCI\VEN_8086&DEV_2826&SUBSYS_306E1054.DeviceDesc% = iaStorE_inst, PCI\VEN_8086&DEV_2826&SUBSYS_306E1054

%PCI\VEN_8086&DEV_2826&SUBSYS_72708086.DeviceDesc% = iaStorE_inst, PCI\VEN_8086&DEV_2826&SUBSYS_72708086

%PCI\VEN_8086&DEV_2826&CC_0104.DeviceDesc% = iaStorE_inst, PCI\VEN_8086&DEV_2826&CC_0104

;

[iaStorE_inst.NTamd64]

CopyFiles=@iaStorE.sys

CopyFiles=@iaStorF.sys

FeatureScore=0x80

;

[iaStorE_inst.NTamd64.HW]

AddReg = iaStorF_addreg

AddReg = msi_addreg

AddReg = storport_addreg

AddReg = sgpio_addreg

AddReg = led_addreg

;

[iaStorE_inst.NTamd64.Services]

AddService = iaStorE, %SPSVCINST_ASSOCSERVICE%, iaStorE_Service_Inst, iaStorE_EventLog_Inst

AddService = iaStorF, , iaStorF_Service_Inst, iaStorF_EventLog_Inst

;

[iaStorF_addreg]

; Layer the RST Filter driver under all Disk class devices as a lower disk class filter

;

HKLM, System\CurrentControlSet\Control\Class\{4d36e967-e325-11ce-bfc1-08002be10318}, LowerFilters, 0x00010008, iaStorF

;

[pnpsafe_pci_addreg]

; Use raw values for BusType, not a DEFINE, ChkInf fails on hex alpha chars

; BusType_ATA == 0x3, BusTypeATA, BusType_RAID == 0x8, BusType_SATA == 0xb

HKR, Parameters\PnpInterface,  5,                           %REG_TYPE_DWORD%,  0x00000001

HKR, Parameters,               BusType,                     %REG_TYPE_DWORD%,  0x00000008

; Tell Storport in Win7/Srv08R2(KB982018) that driver can report 4K sector size (not needed in Win8)

HKR, Parameters\Device,        EnableQueryAccessAlignment,  %REG_TYPE_DWORD%,  0x00000001

;

[Strings]

; Localizable Strings

;

diskId1 = "RSTe Installation Disk"

;server

PCI\VEN_8086&DEV_2826&SUBSYS_047D1014.DeviceDesc = "Intel(R) C600+/C220+ series chipset SATA RAID Controller"

PCI\VEN_8086&DEV_2826&SUBSYS_04811014.DeviceDesc = "Intel(R) C600+/C220+ series chipset SATA RAID Controller"

PCI\VEN_8086&DEV_2826&SUBSYS_04851014.DeviceDesc = "Intel(R) C600+/C220+ series chipset SATA RAID Controller"

PCI\VEN_8086&DEV_2826&SUBSYS_11B61734.DeviceDesc = "Intel(R) C600+/C220+ series chipset SATA RAID Controller"

PCI\VEN_8086&DEV_2826&SUBSYS_201019E5.DeviceDesc = "Intel(R) C600+/C220+ series chipset SATA RAID Controller"

PCI\VEN_8086&DEV_2826&SUBSYS_201219E5.DeviceDesc = "Intel(R) C600+/C220+ series chipset SATA RAID Controller"

PCI\VEN_8086&DEV_2826&SUBSYS_201319E5.DeviceDesc = "Intel(R) C600+/C220+ series chipset SATA RAID Controller"

PCI\VEN_8086&DEV_2826&SUBSYS_201519E5.DeviceDesc = "Intel(R) C600+/C220+ series chipset SATA RAID Controller"

PCI\VEN_8086&DEV_2826&SUBSYS_201619E5.DeviceDesc = "Intel(R) C600+/C220+ series chipset SATA RAID Controller"

PCI\VEN_8086&DEV_2826&SUBSYS_201B19E5.DeviceDesc = "Intel(R) C600+/C220+ series chipset SATA RAID Controller"

PCI\VEN_8086&DEV_2826&SUBSYS_201D19E5.DeviceDesc = "Intel(R) C600+/C220+ series chipset SATA RAID Controller"

PCI\VEN_8086&DEV_2826&SUBSYS_201F19E5.DeviceDesc = "Intel(R) C600+/C220+ series chipset SATA RAID Controller"

PCI\VEN_8086&DEV_2826&SUBSYS_28228086.DeviceDesc = "Intel(R) C600+/C220+ series chipset SATA RAID Controller"

PCI\VEN_8086&DEV_2826&SUBSYS_306E1054.DeviceDesc = "Intel(R) C600+/C220+ series chipset SATA RAID Controller"

PCI\VEN_8086&DEV_2826&SUBSYS_72708086.DeviceDesc = "Intel(R) C600+/C220+ series chipset SATA RAID Controller"

PCI\VEN_8086&DEV_2826&CC_0104.DeviceDesc = "Intel(R) C600+/C220+ series chipset SATA RAID Controller"

;

INTEL = "Intel Corporation"

;

; Non-Localizable Strings

;

SPSVCINST_ASSOCSERVICE = 0x00000002

REG_MULTI_SZ           = 0x00010000

REG_EXPAND_SZ          = 0x00020000

REG_TYPE_DWORD         = 0x00010001

SERVICE_KERNEL_DRIVER  = 1

SERVICE_BOOT_START     = 0

SERVICE_ERROR_NORMAL   = 1

;

; MSI enables.

;

[msi_addreg]

HKR, Interrupt Management, 0x00000010

HKR, Interrupt Management\MessageSignaledInterruptProperties, 0x00000010

HKR, Interrupt Management\MessageSignaledInterruptProperties, MSISupported,       %REG_TYPE_DWORD%,   1

HKR, Interrupt Management\MessageSignaledInterruptProperties, MessageNumberLimit, %REG_TYPE_DWORD%,   1

;

[storport_addreg]

;;; Enables/Disables Idle Power Management for StorPort

HKR, "StorPort", "EnableIdlePowerManagement", %REG_TYPE_DWORD%, 0x00000001

;;; Force StorPort to keep all sense data in Pre-Win8 OSes (max value is 255)

HKR, StorPort, TotalSenseDataBytes, %REG_TYPE_DWORD%, 0x000000FF

;

[sgpio_addreg]

;;; Enable/disable SGPIO support

HKLM, System\CurrentControlSet\Services\iaStorE\Parameters\Device, LED_Supported, %REG_TYPE_DWORD%, 0x00000001

[led_addreg]

;;; Custimizable LED management

HKLM, System\CurrentControlSet\Services\iaStorE\Parameters\Device, LedLocateTimeout, %REG_TYPE_DWORD%, 0x0000000C

HKLM, System\CurrentControlSet\Services\iaStorE\Parameters\Device, LedFaultOnEmptyPortBehavior, %REG_TYPE_DWORD%, 0x00000000

HKLM, System\CurrentControlSet\Services\iaStorE\Parameters\Device, LedBehaviorForInitilazing, %REG_TYPE_DWORD%, 0x00000001

HKLM, System\CurrentControlSet\Services\iaStorE\Parameters\Device, LedBehaviorForRebuilding, %REG_TYPE_DWORD%, 0x00000000

HKLM, System\CurrentControlSet\Services\iaStorE\Parameters\Device, LedBehaviorForMigrating, %REG_TYPE_DWORD%, 0x00000001

;